Hyundai Tie Rod End

Choose the Right Tie Rod End for Your Vehicle

A tie rod end connects steering movement to the wheel assembly, but the correct part depends on whether your vehicle needs an inner or outer end, the installation side, and the exact steering configuration. Start by entering the year, make, model, trim, and engine. Then compare the product title, placement, thread or build notes, and package quantity with the part being replaced. Use the VIN or service information when the catalog shows multiple choices.

Inner vs. Outer Tie Rod Ends

An inner tie rod connects to the steering gear or rack, while an outer tie rod end connects the steering linkage to the steering knuckle. Some vehicles use different parts on the driver and passenger sides, and some listings combine inner and outer pieces in one tie rod end kit. Do not assume every kit covers both sides or the complete linkage. Review placement, quantity, thread information, and each included component on the product page. If damage extends to the gear itself, compare the related power steering rack category before deciding what the repair requires.

Symptoms That Call for a Steering Inspection

Steering looseness, uneven tire wear, a clunk over bumps, or a vehicle that wanders can occur when a tie rod joint has play, but these symptoms do not identify one failed part by themselves. Worn ball joints, control arm bushings, wheel bearings, steering gear components, alignment settings, or tires can produce similar behavior. Inspect the steering and front suspension as a system. Visible joint movement, a damaged boot, or looseness found during a hands-on inspection gives a better basis for selecting a replacement.

Tie Rod End Fitment and Kit Checks

Match more than the vehicle name. Confirm inner or outer location, front placement, left or right designation, thread direction and size, stud shape, overall dimensions, and any drivetrain or production-date note. A listing may contain one end, a side pair, or a multi-piece steering set. Check whether boots, jam nuts, cotter pins, or grease fittings are shown as included rather than assuming the hardware transfers from the old assembly. The vehicle selector and product-specific notes should agree before purchase.

Replacement and Alignment Considerations

Record the old tie rod position before removal, but treat that measurement only as a starting point. Use the vehicle service procedure for safe lifting, fastener handling, joint separation, and final tightening. Protect the new boot from tools and confirm that nearby hoses and wiring remain clear through the steering range. Because tie rod replacement can change toe, arrange an alignment check after installation. Stop driving and seek a qualified inspection if the steering has pronounced free play or the joint is separating.

Frequently Asked Questions (FAQ)